150w Street Light Housing Manufacturer Introduces The Precautions For Using Floodlights
US Free Ads
The Most Popular Online Classifieds in USA.
No Sign up, No Email Required to Post.
US Free Advertising
Free Advertising Classified Ads.
Free Internet Web Site Advertising.
At present, the commonly used spotlights on the market basically use 1W high-power LEDs. There are also a few companies that use 3W or higher power LEDs because of the good heat dissipation technology. It is suitable for large-scale occasions, lighting, buildings, etc. Assuming that the heat of LED lamps is handled well, the surface temperature should be below 60 degrees. The temperature of the tube of the energy-saving lamp must be higher than this. The base of the energy-saving lamp is plastic and is not sensitive to temperature conduction. The base of led is generally made of aluminum alloy, which has heat dissipation effect, generally below 60 degrees.
In addition to the heat dissipation of the floodlight, 150w Street Light Housing Manufacturer introduces what else needs attention in the floodlight?
1. High-purity aluminum reflector, precise beam and good reflection effect.
2. Symmetrical narrow-angle, wide-angle and asymmetric light distribution systems.
3. The light bulb can be replaced with an open-back type, easy to maintain.
4. The lamps are all attached with a scale plate to facilitate adjustment of the irradiation angle.
Through the above introduction, Die-Cast Housing Manufacturers hopes that you can simply refer to the content of this article in future use.
|Related Link: Click here to visit item owner's website (0 hit)|
|Target State: New South Wales|
Target City : All Cities
Last Update : 01 April 2021 5:17 PM
Number of Views: 109
|Item Owner : ninghaiyuchen|
Contact Email: (None)
Contact Phone: (None)
|Friendly reminder: Click here to read some tips.|