China Motorcycle Chain Manufacturer Introduces The Maintenance Details Of Sprocket (Business Opportunities - Other Business Ads)

AUFreeAds > Business Opportunities > Other Business Ads

Item ID 3399430 in Category: Business Opportunities - Other Business Ads

China Motorcycle Chain Manufacturer Introduces The Maintenance Details Of Sprocket




US Free Ads
The Most Popular Online Classifieds in USA.
No Sign up, No Email Required to Post.



US Free Advertising
Free Advertising Classified Ads.
Free Internet Web Site Advertising.

China Motorcycle Chain Manufacturer introduces the maintenance methods of stainless steel sprocket?

1. The tightness and looseness of the stainless steel sprocket should be appropriate. Too tight will increase power consumption, and the roller bearing is easy to be destroyed; too loose stainless steel sprocket is easy to shake and slip the chain. The tightness of the stainless steel sprocket is as follows: lifted from the middle of the stainless steel sprocket or pressed down, about 2% to 3% of the distance between the two stainless steel sprocket management methods
  
2. The stainless steel sprocket should be installed on the shaft without shaking or skewing. The internal threads of two stainless steel sprockets in the same transmission component should be located in the same plane design drawing. When the distance between the stainless steel sprocket management method is less than 0.5 meters, the reason for deviation may be 1 mm; the distance between the stainless steel sprocket management method is Under the condition of 0.5 meters or more, the cause of deviation can be 2 mm. However, it is not necessary to have friction on the side of the stainless steel sprocket. If the deviation of the second wheel is too large, it will easily lead to the damage of the sliding chain and acceleration. When disassembling the stainless steel sprocket, try to pay attention to regular maintenance and adjustment.
  
3. After the stainless steel sprocket is seriously damaged, the new stainless steel sprocket and the new stainless steel sprocket should be disassembled to ensure the toothing. It is not possible to disassemble the new stainless steel sprocket or the new stainless steel sprocket alone. Otherwise, it will cause poor toothing to accelerate the destruction of the new stainless steel sprocket or the new stainless steel sprocket. After the stainless steel sprocket motor shaft is destroyed to a certain level, it should be turned over and used immediately (referring to the stainless steel sprocket used on the adjustable surface) to increase the use time.
  
4. The new stainless steel sprocket is too long or flexed and stretched after use, and cannot be adjusted. You can disassemble the chain depending on the situation, but try to be an even number. The open chain should be turned over from the back of the stainless steel sprocket, the lock piece should be inserted outside, and the mouth of the clamping piece should face the opposite direction of rotation.
  
5. Lubricating grease should be added immediately when working with stainless steel sprocket. The lubricating grease enters as far as possible into the clearance between the roller bearing and the inner pad to improve the working specifications and reduce damage.
  
6. The old stainless steel sprocket cannot be mixed with a part of the new stainless steel sprocket, otherwise it is easy to cause destructiveness in the transmission device and break the stainless steel sprocket.
  
7. When the machinery and equipment are stored for a long time, the stainless steel sprocket should be unloaded and cleaned up with a gasoline or diesel engine, and then coated with lubricating oil or vegetable butter and stored in a dry area.

Through the above introduction, China Silent Chains Company hopes that you can simply refer to the content of this article in future use.

https://www.hzqjchain.com/

Related Link: Click here to visit item owner's website (0 hit)

Target State: New South Wales
Target City : All Cities
Last Update : 19 April 2021 7:07 PM
Number of Views: 57
Item  Owner  : hangzhouhzqj
Contact Email: (None)
Contact Phone: (None)

Friendly reminder: Click here to read some tips.
AUFreeAds > Business Opportunities > Other Business Ads
 © 2022 AUFreeAds.com
2022-01-21 (0.408 sec)