China Industrial Chain Exporter Introduces The Lubrication Form Of The Chain
US Free Ads
The Most Popular Online Classifieds in USA.
No Sign up, No Email Required to Post.
US Free Advertising
Free Advertising Classified Ads.
Free Internet Web Site Advertising.
China Industrial Chain Exporter introduces the relevant knowledge of the chain:
Chains can be divided into many types, which can be divided into: transmission chains, transmission chains, decorative chains, tension chains and special chains. According to the structure of the chain, it can be divided into roller chain, bush chain, plate chain, nylon chain, scraper chain, ring chain and so on.
2. Chain structure
Most chains are composed of chain plates, chain pins, bushings and other parts. Other types of chains can only make different changes to the chain plates according to different needs. Some have scrapers on the chain plates, some have guide bearings on the chain plates, and some have rollers on the chain plates. These changes apply to different applications.
3. The main lubrication parts of the chain
The lubricating parts of ordinary chains are mainly sprocket, roller chain, sprocket chain and shaft chain. Chain, due to the different structure of the chain, the lubrication part of the chain may also change. But in most chains, the lubricating parts are mainly sprockets and roller chains, sprocket chains and shaft chains. Lubrication is difficult because the gap between the shaft and the sleeve of the chain is small. For special chains, such as chains with bearings, rollers and other friction pairs, please consider the lubrication part of these friction pairs.
4. Selection of chain lubricant
Lubricants should be used whenever possible. For special chains and special situations, grease and dry film lubricants can be selected. Choose suitable and economical lubricants to meet the requirements of chain operation lubricants and equipment production.
5. Lubrication form of the chain
The type of lubrication of the chain will depend on how the chain is used. Most chain drives will be lubricated by drip irrigation and oil bath as well as jet lubrication and oil rope lubrication. Drip lubrication is usually used for faster and longer-distance transportation chains, such as baking equipment chains, textile equipment chains, etc. The characteristics of this lubrication method are good lubrication effect, less waste, but poor lubrication uniformity. Most high-speed transmission chains use lubricating oil. The characteristics of this lubrication method are good lubrication effect, good uniformity, certain limitations, and large waste. Closed chain transmission generally adopts oil bath lubrication. For example, oil field drilling equipment. The characteristics of this lubrication method are: it can be said to be an ideal lubrication method, but it also has many limitations. There are other lubrication methods, especially very short lubrication methods. Almost all lubrication methods are manual: it should be said that this is one of the unsatisfactory lubrication methods.
Through the above introduction, Hangzhou Qianjiang Leaf Chains Manufacturers hopes that you can simply refer to the content of this article in future use.
|Related Link: Click here to visit item owner's website (0 hit)|
|Target State: Queensland|
Target City : All Cities
Last Update : 26 April 2021 6:55 PM
Number of Views: 81
|Item Owner : hangzhouhzqj|
Contact Email: (None)
Contact Phone: (None)
|Friendly reminder: Click here to read some tips.|