150w Street Light Housing Wholesaler Introduces The Strategy Of Foundation Pouring (Automobiles & Vehicles - Bicycles)

AUFreeAds > Automobiles & Vehicles > Bicycles

Item ID 3401711 in Category: Automobiles & Vehicles - Bicycles

150w Street Light Housing Wholesaler Introduces The Strategy Of Foundation Pouring




US Free Ads
The Most Popular Online Classifieds in USA.
No Sign up, No Email Required to Post.



US Free Advertising
Free Advertising Classified Ads.
Free Internet Web Site Advertising.

150w Street Light Housing Wholesaler introduces the knowledge of foundation casting of high pole light poles. First of all, determine the position of the lamp; survey the geological conditions, if the surface of the ground is soft soil at 1 m2, then the excavation depth should be deepened; at the same time, confess that there is no other equipment (such as cables, pipes, etc.) below the excavation position and there is no long-term Shade objects, otherwise the position should be changed appropriately; reserve (excavate) a 1.3-meter pit that conforms to the specification in the position of the lamp holder; perform positioning and pouring of the pre-embedded parts.

The embedded part is placed in the center of the square pit, one end of the PVC threading pipe is placed in the middle of the embedded part, and the other end is placed in the storage area of ​​the battery. Pay attention to insist that the embedded parts, the foundation and the original place are on the same level (or the top of the screw is on the same level as the original place, depending on the needs of the site), and one side should be parallel to the distance; in this way, the rear end of the light pole can be upright and upright. Not skewed. Then use C20 concrete to pour and fix it. During the pouring process, the sensational rod must not be stopped to ensure the compactness and sturdiness of the whole; after the construction is completed, the remaining mud on the positioning plate shall be cleaned up in time, and the impurities on the bolts shall be cleaned with waste oil; During the concrete setting process, regular watering and maintenance are required; when the concrete is completely set (generally more than 72 hours), the high-pole light installation can be carried out.

Through the above introduction, Die-Cast Housing Factory hopes that you can simply refer to the content of this article in future use.

https://www.cnledstreetlight.com/

Related Link: Click here to visit item owner's website (0 hit)

Target State: Queensland
Target City : All Cities
Last Update : 14 July 2021 5:25 PM
Number of Views: 189
Item  Owner  : ninghaiyuchen
Contact Email: (None)
Contact Phone: (None)

Friendly reminder: Click here to read some tips.
AUFreeAds > Automobiles & Vehicles > Bicycles
 © 2022 AUFreeAds.com
2022-06-26 (0.392 sec)