Potassium Methyl Siliconate Wholesaler Introduces How To Use Waterproofing Agent (Automobiles & Vehicles - Auto Insurance)

AUFreeAds > Automobiles & Vehicles > Auto Insurance

Item ID 3409077 in Category: Automobiles & Vehicles - Auto Insurance

Potassium Methyl Siliconate Wholesaler Introduces How To Use Waterproofing Agent




US Free Ads
The Most Popular Online Classifieds in USA.
No Sign up, No Email Required to Post.



US Free Advertising
Free Advertising Classified Ads.
Free Internet Web Site Advertising.

Potassium Methyl Siliconate Wholesaler introduces the use of waterproofing agents:

1. Waterproof mortar construction: clean up the grass-roots sediment, sundries, oil, etc.; the water-proofing agent: water: ash: sand ratio is controlled at: 0.03~0.05:045:1:2.5~4 (32.5R grade or above silicate Cement, medium sand, and mud content less than 3%) in order to ensure uniform mixing, the silicone waterproofing agent should be mixed with water evenly and then cement and sand should be added. The waterproof layer is constructed in two layers (each layer is 10mm thick). First apply plain mortar 1mm on the bottom layer, then apply the waterproof mortar layer, compact it during the initial setting, and use a wooden trowel to rub it into a pockmarked surface; apply the second layer of waterproof mortar and then press it with light (for decoration construction, it must be rubbed into a pockmarked surface) . According to the normal watering maintenance, the effect of spraying cement curing agent is better.

2. Waterproof concrete construction: The dosage of this silicone waterproofing agent solution accounts for 1~2% of the cement dosage, and it is evenly mixed into the prepared concrete, which is the same as the construction method of ordinary concrete. In order to ensure uniform mixing, the silicone waterproofing agent should be mixed evenly and then cement, sand and stones should be added.

3. Leakage repair construction: When the original base layer is smooth, it needs to be chiseled into a pockmarked surface. After cleaning the floating ash, a plain mortar binding layer is made, and a waterproof mortar layer is applied. The leaking part must be blocked first to stop the water. The yin and yang corners should be rounded and compacted. The stubble should be lame (the width of the stubble is 100~150mm), and the plain mortar should be used as the bonding layer first, and then the waterproof mortar layer should be applied.

4. Spraying impermeability construction: The silicone waterproofing agent is diluted with 10 times of water and then sprayed on the edge surface of water-absorbing inorganic building materials such as cement surface, brick, tile, limestone, ordinary paint wall, or the surface of paper, wood and fiberboard for impermeability Moisture-proof treatment, has excellent waterproof effect. For good results, a second coat can be applied while the first coat is still wet. Waterproof per kg After the agent is diluted, it can be sprayed on an area of ​​about 20 square meters each time.

Through the above introduction, Mold Release Agent Company hopes that you can simply refer to the content of this article in future use.

https://www.silways.com

Related Link: Click here to visit item owner's website (0 hit)

Target State: New South Wales
Target City : All Cities
Last Update : 17 May 2022 4:33 PM
Number of Views: 275
Item  Owner  : ritchiesilways
Contact Email:
Contact Phone: (None)

Friendly reminder: Click here to read some tips.
AUFreeAds > Automobiles & Vehicles > Auto Insurance
 © 2023 AUFreeAds.com
2023-03-30 (0.480 sec)