Free Classifieds at AUFreeAds.com - View Item Content by ID 3411015

AUFreeAds > Business Opportunities > Money Making > Item ID 3411015

Item ID 3411015 in Category: Business Opportunities - Money Making

Cannot view this item. It could be pending, expired or deleted.
Below item is randomly selected from the same category and may have similar content.

Distribution Accessories Factory Introduces The Selection Strategy Of Cables




US Free Ads
The Most Popular Online Classifieds in USA.
No Sign up, No Email Required to Post.



US Free Advertising
Free Advertising Classified Ads.
Free Internet Web Site Advertising.

Distribution Accessories Factory introduces the basic requirements for selecting cables:

1. In general environments, aluminum-core cables should be used. In places with severe vibration and special requirements, copper-core cables should be used; large-scale important public buildings should use copper-core cables.

2. For buried cables, armored cables with outer sheaths should be used; in places where there is no possibility of mechanical damage, plastic-sheathed cables or lead-clad cables with outer sheaths can also be used;

3. In soils where displacement may occur (such as swamps, quicksand, near large buildings), steel wire armored cables should be used for buried laying, and measures can also be taken to eliminate the stress on the cables due to cable displacement, such as reserved Cable length, soil reinforcement with sheet piles or row piles, etc.

4. In soil with chemical corrosion or stray current corrosion, it is not suitable to lay the cable underground. If it must be buried, the anti-corrosion cable should be used or measures to prevent the stray current from corroding the cable should be adopted.

5. Cables laid in pipes or pipes should be plastic sheathed cables or bare armored cables.

6. When laying cables in cable trenches or cable tunnels, there should be no flammable and flammable outer sheaths. Bare armored cables, bare lead cables, or flame-retardant plastic sheathed cables should be used.

7. Overhead laying should use cables with an outer sheath or all-plastic power.

8. When the cables are laid in places with a large height difference, plastic insulated cables, non-drip cables, or dry insulated cables should be used.

9. In the three-phase four-wire system, four-core cables should be used.

10. Fire-resistant cables can be used for important backup trunk lines (such as the connection line between the backup generator set and the transformer).


Through the above introduction, Coaxial Cable Manufacturers hopes that you can simply refer to the content of this article in future use.

https://www.wanmatianyi.com/

Related Link: Click here to visit item owner's website (1 hit)

Target State: Australian Capital Territory
Target City : All Cities
Last Update : 14 December 2022 7:22 PM
Number of Views: 230
Item  Owner  : wanmatianyizj
Contact Email: (None)
Contact Phone: (None)

Friendly reminder: Click here to read some tips.
AUFreeAds > Business Opportunities > Money Making > Item ID 3411015
 © 2023 AUFreeAds.com
2023-09-26 (0.580 sec)